Setting Up Progressive Scan Feature (For Progressive Scan Tv Only) - Philips DVP3005/02 User Manual

Getting Started
Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD player to
your TV using Y Pb Pr (see page 10.)
1
Turn on your TV.
2
Turn off your TV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
3
Press POWER on the remote control to
turn on the DVD player.
4
Select the correct Video Input channel.
(See page 15).
➜
The DVD background screen appears
on the TV.
5
Press SYSTEM MENU.
6
Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
16
7
Select {COMPONENT} to {YUV}, then
press OK to confirm.
8
Select {PROGRESSIVE} to {ON}, then OK
to confirm.
➜
The instruction menu appears on the
TV.
9
Press 1 to highlight
and press OK to confirm.
There will be a distorted picture on
your TV at this state until you turn
on the progressive scan mode on
your TV.
0
Turn on your TV progressive scan mode
(refer to your TV user manual.)
➜
The below menu appears on the TV.
!
Press 1 to highlight
and press OK to confirm.
➜
The set up is complete now and you
can start enjoy the high quality picture.
SYSTEM MENU
.
in the menu
in the menu