Sound Mode - Philips DVP3020K/61 User Manual

LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48K: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96K: Playback a disc recorded at the
sampling rate of 96kHz. This rate can only
be achieved in Stereo-Classic (Flat) mode.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-40 DVP3020K_61_eng_RC2
DVD Setup Menu Options

Sound Mode

The options included in Sound Mode
Setup are: '3D', 'Movie Mode' and 'Music
Mode'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {SOUND MODE}, then press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
3D
This function provides a virtual surround
sound experience using just two speakers.
➜
Off, Living Room, Hall, Arena and
Church
Movie Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the video to enhance your
favorite movie sound track.
➜
Off, Sci-Fic, Action, Drama and
Concert
Music Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the audio to enhance your
favorite music.
➜
Off, Digital, Rock, Classic and Jazz
29 29/06/06, 11:13 AM
29