Audio Setup Menu; Analog Output; Digital Audio Setup - Philips DVP3020K/61 User Manual

DVD Setup Menu Options

Audio Setup Menu

1
In disc mode, press SETUP.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.

Analog Output

This options allows you to set the stereo
analog output of your DVD player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
28
01-40 DVP3020K_61_eng_RC2

Digital Audio Setup

The options included in Digital Audio
Setup are: 'Digital Output' and 'LPCM
Output'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful hint:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
28 29/06/06, 11:13 AM