Getting Started
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system
of the Disc, the TV and the DVD Player
should match.
1
Press SETUP.
2
Press 2 to select {VIDEO SETUP PAGE}.
3
Press 3 4 to highlight {TV TYPE}, then
press 2.
4
Press 3 4 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
18
01-48 DVP5965K_75_eng_RC3
5
Select an item and press OK.
➜
Follow the instructions shown on the
TV to confirm the selection (if any).
Helpful Hints:
–
Before changing the current TV
Standard setting, ensure that your TV
supports the 'selected TV Type' system.
–
If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
To reset to default TV colour system
manually:
G
Wait for 15 seconds for auto recovery.
OR
1
Press and hold EJECT
player to open the disc tray.
2
When the disc is ejected, press and hold
EJECT
'3' on the remote control for few
seconds.
➜
The DVD background screen appears
on the TV.
18
0
on the DVD
0
again, and numeric keypad
22/12/06, 11:45 AM