Optional Connections; Connecting To A Stereo System; Stereo System Has Right/Left Audio In Jacks; Connecting To A Digital Av Receiver - Philips DVP3110K/75 User Manual

Connecting to a stereo
system
Stereo system has right/ left Audio
In jacks
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of the
DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
01-47_dvp3110K_75_eng.indd 13 01-47_dvp3110K_75_eng.indd 13

Optional connections

Connecting to a digital AV
receiver
OPTICAL
Receiver has a PCM, Dolby Digital
or MPEG decoder
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
C
Set the DVD player's digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 32
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
13
2007-02-09 2:44:53 PM 2007-02-09 2:44:53 PM