Table of Contents
Advertisement
Setup Menu Options
Audio Setup Page
Analog Output
Digital Audio Setup
38
dvp5996K_94_eng1.indd 38
dvp5996K_94_eng1.indd 38
(continued)
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device, multi channel audio system
or TV using the analog output jack.
{ LT/RT }
–
{ Stereo }
–
{ V SURR }
–
{ Multi Channel } –
This setting is only required if you have connected the audio
output of this unit to an amplifi er/receiver using the digital
output jack.
{ Digital Output } –
The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
The connected device can only output
stereo audio through two speakers.
For virtual surround sound effects.
Enable multi-channel output.
{ Off }
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{ All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(2-channel).
2008-03-10 11:34:29 AM
2008-03-10 11:34:29 AM
Advertisement
Table of Contents
