Vario Hearables Bluetooth 5 Quick Start Manual

Bluetooth 5
1: Modules (insert into your silicone moulds)
2: Control Unit
3: + Button
4: Centre Button
5: – Button
6: Rechargeable Battery Unit
7: Micro USB Charging Port

Quick Start Guide

On/Off
• Centre button long press (2 sec) – power on/off
Pairing
• With your Vario Bluetooth unit turned OFF, open the
Bluetooth setting on the device you want to connect to
(eg your phone)
• On the Vario headset control unit, press and hold
centre button. You will hear "power on", but continue to
hold down the button until you hear "pairing", and then
release. The light will �lash blue and red.
• Your device will now show "ColsanBTMod". Click that
to connect the two devices.
• The headset will automatically connect from now on.
• Remember to turn off the Vario headset if you aren't using it.
Music
• Centre button – pause
• +/– short press – volume control
• +/– long press – skip track
Calls
• Centre button short press – answer/end call
• Centre button double press – redial
• Centre button long press – call reject
• +/– – volume control
Power
• Rechargeable micro USB
• Red light – Charging
• Blue light – Fully charged
NB. When removing the modules
from the silicone moulds, DO NOT
pull them out by the cable. Bend
the silicone back at the top and
remove modules as normal.
2
6
3
4
5
3
4
5
1
7