Karaoke; Use Philips Easylink - Philips BDP3300K/55 User Manual

‡ Connect your smartphone to the same
home network (see the user manual of the
smartphone for details).
‡ Turn on this player
Control your player
Use a smartphone to browse, control and play
PHGLD ÀOHV IURP WKLV SOD\HU
1
Insert a data disc or USB storage device
into this player.
2
On your smartphone, tap the MyRemote
icon from the home screen.
» The name of this player is displayed on
the smartphone.
3
Select this player from the smartphone
screen.
» The smartphone used as a virtual
remote control is enabled.
4
On the smartphone, tap the Media
(Media) tab, and then select the disc or
USB source.
» The folders in the data disc or USB
storage device are displayed.
5
2SHQ D IROGHU DQG VHOHFW D ÀOH WR SOD\
‡ To access the remote control, return
to the previous smartphone screen,
and then tap the Remote (Remote)
tab. Only the relevant control buttons
are enabled.
6
Tap the control buttons on the
smartphone to control play.
‡ To access more control buttons, swipe
the screen to the left or right.
‡ To exit the application, press the home
button on the smartphone.

Karaoke

1
Connect a microphone (not supplied) to
the MIC connector on this player.
2
Press to display the home menu.
16 EN
3
Select [Setup] > [Audio] > [Karaoke], and
press OK.
» The Karaoke menu is displayed.
4
Select [Microphone] > [On], and press
OK to turn on the microphone sound
output.
5
Play a disc, and then sing through the
microphone.
Set up Karaoke via the Karaoke menu
‡ [Microphone]: Turn on or off microphone
sound output.
‡ [Microphone volume]: Change the
microphone volume.
‡ [Echo]: Change the echo level.
‡ [Key]: Change the pitch level that matches
your voice.
Original vocal for Karaoke
Press repeatedly AUDIO on the remote
control until the original vocal is turned off.
Complete cancelation of the original vocal is
disc dependent.

Use Philips EasyLink

This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
2
Press .
3
Select [Setup]> [EasyLink].
4
Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.