Polygroup TG90P4740S00 Manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should
always be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installa-
tion.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or exten-
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m. This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Do not use with an extension cord unless plug
can be fully inserted. Do not alter or replace the plug.
n. This product is equipped with push-in type lamps. Do not
twist lamps.
o. This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Also
unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper
fuse rating) and check the product.
p .Read and follow all instructions that are on the product or
provide with the product.
SAVE THESE INSTRUC TIONS
q.
Pre-Assembly
Package Contents
Part Description
A Tree top, tag 4
B Tree center, tag 3
C Tree center, tag 2
D Tree bottom, tag 1
E Tree stand
Assembly
Assembling the tree stand
Step 1.Pull apart the legs of the stand so that they are
snapped into an x-shape, place the tree stand on a
level surface.
Step 2.When inserting the bottom section of the tree into the
assembled stand, insert and turn the eyebolts into the
stand and tighten until the tree pole is firmly secured.
To close the stand, remove the eyebolts, press the metal
button and fold the legs together.
Eye Bolt
Assembling the tree
This tree assmebles with Quick Set® technology ---Set
up and light up your tree in less than 10 minutes!
Step 1.Remove the protective caps from the tree bottom
and insert the pole into the tree stand.
Section 4
S50
Section 3
S100
S100
S50
S100
Section 2
S100
S100
Section 1
S100
S100
Christmas Tree
Model:TG90P4740S00
Sku # 692628
Quantity
Eye Bolt
Click
Do Not Tamper
Internal Parts
S100
S100
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Insert
Green Label
Foot Pedal
Plug Into Wall
on/off Switch
Outlet
1
1
1
1
1