Mounting On A Table; Using The Button - LG 43LJ550V-ZA Preparation For The First Turn On

• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the
following illustration.
• When transporting the TV, do not expose the TV to jolts or excessive
vibration.
• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
• Do not apply excessive pressure to cause exing /bending of frame
chassis as it may damage screen.
• When handling the TV, be careful not to damage the protruding
buttons.
• Avoid touching the screen at all times, as this may
result in damage to the screen.
• Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to
the TV may occur.

Using the button

You can simply operate the TV functions, using the button.
Basic functions
Power On (Press)
Power O (Press and Hold)
1
Menu Control (Press
Menu Selection (Press and Hold
)
2
)
3
1 All running apps will close, and any recording in progress will stop.
2 You can access and adjust the menu by pressing the button when
TV is on.
3 You can use the function when you access menu control.
Adjusting the menu
When the TV is turned on, press the button one time. You can adjust
the Menu items using the button.
Turns the power o .
Changes the input source.
Scrolls through the saved programmes.
Adjusts the volume level.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (minimum) space from the wall for proper
ventilation.
2 Connect the power cord to a wall outlet.
• Do not place the TV near or on sources of heat, as this
may result in re or other damage.
• Do not apply foreign substances (oils, lubricants, etc.)
to the screw parts when assembling the product.
(Doing so may damage the product.)
10 cm