Daily Use - Electrolux GA60SLVS User Manual

Hide thumbs Also See for GA60SLVS:
Table of Contents

Advertisement

Available languages

Available languages

3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
When the rinse aid dispenser
needs refilling, the display
shows a message.

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the display shows the salt refilling
message, fill the salt container.
• If the rinse aid empty message is
shown, fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
9.1 Using the detergent
A
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
B
C
If you use multi-tablets and the drying
performance is satisfactory, the rinse aid
refill indication can be disabled by setting
the rinse aid level to 0.
We recommend to always
use rinse aid for better drying
performance, also in
combination with multi-
tablets containing rinsing
agent.
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
When you activate the appliance, the
display shows the programme list. The
programme ECO is always the default
programme.
1. Scroll the programme list and select a
programme.
2. Select applicable options if desired.
Once options are set, go back to the
programme list to start the selected
programme.
3. Press OK.
ENGLISH
15

Advertisement

Chapters

Table of Contents
loading

Table of Contents