Mopar 82212502 Manual page 17

NOTE: There may already be a 22 pin connector to the
radio. Use the existing one and discard the one sup­
plied in the kit.
76. Back out the connector wire locking tab from the radio
harness connector.
77. Insert the camera harness wires into the radio harness
connector as follows:
a. Signal wire (DG/BR) ­ cavity 3
b. Return wire (DG/OR) ­ cavity 4
c. Shield wire (DG/WT) ­ cavity 5
78. Position the radio to the instrument panel.
79. Connect the AM/FM antenna (2).
80. Connect the electrical connector (1) .
81. Connect the satellite/navigation antenna (3).
82. If equipped, connect the USB connectors (4).
83. Install the radio (2) mounting fasteners (1).
Jun 30, 2011
17
K6861197