Procedure:
1 Unscrew the four screws from the back housing.
WARNING: Safety Critical
Use a T8 pin torx screwdriver with 3.5 +/-0.2 lbf-in torque to remove the screws.
Figure 16: Unscrewing the Back Housing
2 Remove the battery gently from the top.
WARNING: Safety Critical
Do not use conductive or sharp tools when removing the battery.
Figure 17: Removing the Battery
3 Insert the battery into the battery compartment. Attach the left side of the battery first.
WARNING: Safety Critical
Use only Motorola Solutions authorized BT60 Battery (HKNN4014_).
MN005686A01-AB
Chapter 6: Maintenance
19