Figure 11: Removing The Cable; Figure 12: Cable Orientation; Figure 13: Attaching The Cable Connector - Motorola PMMN4125 Installation Manual

Figure 11: Removing the Cable

5 Connect the new cable, ensure that the cable orientation is correct with one hole facing out.

Figure 12: Cable Orientation

6 Attach the cable connector to the molex.

Figure 13: Attaching the Cable Connector

7 Reassemble the battery tray by screwing in the three screws.
WARNING: Safety Critical
Use a T6 torx screwdriver with 2.8 +/-0.2 lbf-in torque to ensure that the screws are
tightened.
MN005686A01-AB
Chapter 6: Maintenance
1
17