Communication Hardware; Monitor Specifications; Power Consumption - IBM NetVista N70 Reference

Communication hardware

Monitor specifications

Power consumption

4
Figure 1. Hardware connectors
Your N70 thin client includes an integrated Ethernet connection.
For a 10 Megabit (Mb) line speed operation, you need a category 3 or higher
Unshielded Twisted Pair (UTP) type of cable. For a 100 Mb line speed operation,
you need a category 5 UTP type of cable.
Connectivity Options
v Support available for customer installed token-ring card.
v Support available for customer installed wireless card.
Refer to "Appendix G. Connector pin information" on page 51 for communication
cable specifications.
The N70 thin client functions with a basic video graphics adapter (VGA) class
monitor that meets the Video Electronics Standards Association (VESA) standards
of refresh rate and resolution.
Refer to "Appendix F. Monitor specifications" on page 49 for a list of resolutions
and refresh rates that the N70 thin client can support. Your monitor may not
support all resolutions and refresh rates.
The normal power consumption for the N70 thin client ranges from 24 to 35 Watts
while running applications. During periods of inactivity, the system switches into
the suspend state, and power consumption reduces to approximately 18 Watts.
Once the system enters the soft-off state, power consumption reduces to
approximately 10 Watts.