General - Philips 36PW9618/05 User Manual

General

General
Setup
Menu background
Smart surf
Dual screen format
Freeze format
Factory settings
TV provider
NEX IEW
Tilt adjust
OSD
Programme title
Teletext level 2.5
Set/Change code
This menu allows you to change various settings
that are presumably adjusted less frequently than
most other settings.
Press the i key on the remote control to
get information about the selected menu
item.
Smart surf
& Select
Smart surf
é
With the cursor left/right, select
if you want the 0 key to
•
2 programmes
toggle between the current and the previously
selected channel,
if you want the 0 key to
•
9 programmes
summon a list of up to 9 channels which can
be selected,
if you want the 0 key to quickly
• Themes
select TV programmes if
defined themes is broadcast.
To add/remove a channel or source:
Tune to the channel or source you wish to add
or remove. Press the 0 key and press the
cursor right to add or remove.
Note: If there are already 9 channels/sources in the
list, the one at the bottom of the list will be
removed.
Dual screen format
This menu allows you to select the preferred
format which can then be displayed toggling the
b key on and off.
See Dual screen/PIP/ Multipip, p. 16.
&
Select Dual screen format
down and press the cursor right.
é
Select
Dual screen
the cursor down.
When Dual screen mode is activated with the
remote control b key, and when:
• is selected, the TV splits the
Dual screen
screen into two equally sized screens.
• is selected, the TV shows a full screen of
PIP
video with a pip window of video on top if it;
• or is selected, the TV will display 3
PIP3 PIP12
or 12 pip screens.
10
.
TV with
NEX IEW
with the cursor
, , or
PIP PIP 3 PIP 12
Freeze format
Freeze format allows you to select among
three options: Freeze, Replay or Photo finish, to
be activated when you press the S key on
the remote control. See p. 4.
Note: Continuing to hold the S key down will also
cycle the TV through the various formats. Changing
the format this way does not store the selected
format.
Factory settings
This resets the picture and sound settings to
their predefined factory values, but maintains
the channel installation settings.
TV
NEX IEW
Select a TV broadcaster that provides
TV
NEX IEW
see p. 17.
OSD (On Screen Display)
See Use of the remote control, p. 5, i On
screen information.
& Select
OSD
é
Select
Normal
display of the programme number. Also TV
channel and programme information are
extended.
channel information.
Note: When subtitles is switched on, see Features,
p.15, continuous display of the programme number
is not possible.
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours, other background colours
and nicer pictures in the teletext pages.
&
Select
Teletext level 2.5
é
Press the cursor right to select
2.5 On
"
Press the cursor right again to select
with
level 2.5 Off
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
provider
data. How to make use of
.
to activate the continuous
Minimum will display reduced
.
to take advantage of this feature.
if you like the more neutral
TV ,
NEX IEW
Teletext level
Teletext