a
a Make your headset in the matching mode. When your headset is off, press the
multiple-function button for about 7 seconds, and your headset enter the matching state until the
red and blue lights start flashing alternately.
b
"
b Enable the "device searching" function in your mobile phone. Follow the instructions in the
user manual of your mobile phone and perform the bluetooth device searching function in your
mobile phone. The process of searching for the bluetooth device may take several seconds, and for
more information about mobile device searching, you can refer to the user's guide of your mobile
phone. When searching is finished, the device will be displayed.
c
c Select the corresponding model of this bluetooth headset from the list of devices which
have been found, and then perform operations according to the prompts of your mobile phone.
d
d When your mobile phone displays the prompt message, it will be required to input the
identification code, and at this time, you should input the local identification code 0000 for
confirmation. The headset address will be stored in your mobile phone (some mobile phones don't
need to enter an identifying code)
e
e After successful matching, the red and blue indicator lights which flash on the headset
alternately will become the blue indicator light.
3.5
/
3.5 Volume adjustment/upper and lower tune adjustment
When you use this stereo headset to make phone calls or listen to music, you can control the
volume by pressing the volume button.
3.5.1
3.5.1 press the up volume button to increase the sound.
3.5.2
3.5.2 Press the down volume key to reduce the sound.
1
Note 1: there is a maximum volume and a minimum volume in the volume, and please adjust
your bluetooth headset to an appropriate volume;
"
7
0000