Replacing The Filters; Protecting The Environment - Black & Decker Dust Buster 90501843 Instruction Manual

3.6v vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with clean
filters and an empty dust bowl.

Replacing the filters

The filters should be replaced every 6 to
9 months and whenever worn or damaged.
Replacement filters are available from
your Black & Decker dealer (cat. no. VF60).
Remove the old filters as described
above.
Fit the new filters as described above.

Protecting the environment

Separate collection. This
product must not be disposed
of with normal household waste.
Should you find one day that your
Black & Decker product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
Battery (Fig. G)
NiCd/NiMH
14
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.
Warning! Disconnect the appliance from
the power supply before removing the
battery.
Warning! Once removed, the battery
cannot be refitted.
Service
Black & Decker offers a full network of
company-owned and authorized service
locations. All Black & Decker Service
Centers are staffed with trained personnel
to provide customers with efficient and
reliable power tool service.
Whether you need technical advice, repair,
or genuine factory replacement parts,
contact the Black & Decker location
nearest you.
Technical data
Voltage
Battery type
Weight
Charger
Model No.
Voltage AR
AA045020D
Voltage B2C
VA050025D
Voltage B3
UA050020a
Voltage BR
90501843
Discharge the battery by operating
the appliance until the motor stops.
Take the accessories from the
appliance.
Remove the screws (6).
Open the appliance.
Remove the battery and the attached
motor and switch module (7).
Use a screwdriver to detach the battery
from the motor and switch module.
Place the battery in suitable
packaging to ensure that the
terminals cannot be short-circuited.
Take the battery to your service
agent or a local recycling station.
Input
220V ~ 50Hz 45mA
220V ~ 50Hz 45mA
120V ~ 60Hz 5W
127V/220V ~ 60Hz 4W
NV3600
V 3.6
NiCd/NiMH
kg 0.9
Output
4.5V ~ 200mA
5V ~ 250mA
5V ~ 200mA
4.5V ~ 130mA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents