Advertisement
Quick Links
Dual Monitor Desk Stand
Instruction Manual
SKU: STAND-V002P
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v002p
help@vivo-us.com
www.vivo-us.com
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V002P
Summary of Contents for Vivo STAND-V002P
- Page 1 Dual Monitor Desk Stand Instruction Manual SKU: STAND-V002P Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v002p help@vivo-us.com www.vivo-us.com 309-278-5303...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 17.6 lbs Failure to do so may result in serious injury. (8 kg) PER ARM Phillips Screwdriver ASSEMBLY STEPS STEP 1 Attach Pole Cover (E) to Pole (B). Slide cable management clip (D) and base cover (I) on to bottom of pole (B). Thread pole onto base (A). Tighten grub screws in bottom of base (A) using 3mm allen key (F). - Page 4 STEP 2 Adjust bracket supporter using 3mm allen key (F). STEP 3 Slide arm (C) over top of pole and tighten using 5mm allen key (G).
- Page 5 STEP 4 Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitors, making sure to leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plates. Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all eight bolts using phillips screwdriver. M- C M- A M- B...
- Page 6 STEP 5 Adjust tension in monitor bracket with 6mm allen key (H) as shown in diagram. +45 ° -45 ° STEP 6 Store allen keys (H, G) in cable management clip (D) for future adjustment.
- Page 7 STEP 7 Do not move monitors past center point of gravity. This could result in tipping. STEP 8 Adjust monitor height using 5mm allen key (G) as shown in diagram. 360° 360°...
- Page 8 - 83% within < 2hr - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V002P and is the answer not in the manual?
Questions and answers