Names Of Components; Specifications; Hand Drying Area; Settings - Mitsubishi Electric JT-SB116JH2-S-NA Handbook

4. Names of components

*Shaded areas in the figure indicate antibacterial material.
Side cover
HEATER
AIR SPEED

5. Specifications

Model voltage
JT-SB116JH2-S-NA
JT-SB116JH2-W-NA
• Air speed is calculated from the static pressure measured by the pitot tube (at the nozzle).
• Sound is the A range value measured in an anechoic room. (Average of the three points: 78 3/4" (2 m) from the
front and both sides of the unit.)
• The heater is turned off automatically when ambient temperature reaches 86°F (30°C).
• Compliance: Conforms to ANSI/UL Std. UL499
Certified to CAN/CSA Standard C22.2 No. 36
Display
Power lamp
Heater lamp
Switches
HEATER
AIR SPEED
ON HIGH
OFF STANDARD
※ Factory default settings

Settings

OFF / ON
STANDARD / HIGH
Rated Rated Rated
frequency current
(Vac) (Hz) (A)
120 60 11.4

Hand drying area

Main unit
Front panel
Tank cover
Drain tank
Power consumption
Air
speed
Heater
setting
ON
HIGH 1250
STANDARD 1090
─ 5 ─
Black wall area
Sensor
The blue indicator does not have a sterilizing effect.
Do not look directly into the blue indicator.
lter
Air
(W)
Noise
speed
(dB(A))
Heater
(m/h)
OFF
730 235 59
570 215 56
blue indicator
Drain tank
Weight
capacity
26.5 lbs 1.7 pt
(12 kg) (0.8 ℓ)