Download  Print this page

Mitsubishi Electric JT-SB116JH2-S-NA Handbook page 25

Hide thumbs

Advertisement

4 Tilt the panel (front) in the direction of the arrow, and remove it.
5 Remove the sensor holder.
Assembly precaution
Take care not to pinch the lead wires.
6 Unhook the claw of the sensor holder (one location, indicated by
and remove the sensor circuit board (JT-30S3R).
When reassembling
Reassemble the unit in the reverse order of disassembly.
After reassembly, always make a test run to be sure that the unit oper-
ates properly.
),
─ 25 ─
Panel (front)
Sensor holder
Sensor holder
Sensor circuit board (JT-30S3R)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jt-sb116jh2-w-naJt-sb116jh-g-naJt-sb116jh-w-na