Operation; Controls And Displays; How To Weigh Properly - Seca 874 Instruction Manual And Guarantee

4. Operation

Controls and displays

2 in 1 key/
to switch between kg and lbs

How to weigh properly

– Press the start key with no load on the
scale.
SE(A 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– If necessary, switch the weight display
(see page 15).
– Ask the patient to mount the scale.
Once on the scale, the patient should
stand still.
The HOLD function is activated auto-
matically at weights of over 1.5 kg or
3.3 lbs. The display flashes until a stable
weight has been measured. The display
is then frozen until the next weighing op-
eration. HOLD appears in the
display.
– Read off the weighing result on the
digital display.
– If a load greater than 200 kg or 440 lbs
is placed on the scale,
the display.
– To switch off the scale, press the start
key again.
14
0. 0 0
and appear con-
St0P
appears in
start key
61. 4 0
kg
HOLD
St0p
kg
ON-OFF switch