1. Before operation, make sure batteries are installed in the remote control.
2. Open the battery cover at the bottom of the remote control as indicated on the illustration.
3. Insert 4 AA batteries (pay special attention to correct polarization).
4. Close the battery compartment cover.
Producer suggests using alkaline batteries in the remote control, for optimum operation.
1. Turn the power switch to OFF on the car and the remote control.
EN
2. Plug charging cable from the transmitter into the chassis charging socket, as shown on the
illustration. When charging, make sure the power switch on the car and the remote control are
both in OFF position.
14
REMOTE CONTROL BATTERY INSTALLATION
②
①
Owner's manual
CAR CHARGING