Adjust Tv Volume - Philips 42PFL7486T/12 User Manual


If the TV is in standby, press
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press CH +/- on the front of the TV.
Though your TV consumes very little energy
in standby, it does use some energy. If you
are not going to use the TV for an extended
period of time, switch it off to cut off the
power.
Switch TV to standby
Press on the remote control. The remote
control sensor on the TV switches to red.
Switch off the TV
Press the power switch at the base of the
TV to the OFF position.
The TV no longer consumes energy.
Automatic switch off
This TV is designed with energy efficiency
settings. If there is no user interaction (such
as pressing a remote control button or a
control on the front panel) for four hours,
the TV will automatically switch to standby.
To disable automatic switch off,
While you watch TV, press the green button
on the remote control. Select [Auto switch
off] and press OK. An on screen message
confirms that automatic switch off is
disabled.
EN 14

Adjust TV volume

on the
Increase or decrease the TV volume


Mute or unmute the TV volume


Adjust headphone volume
1. Press
[Sound].
2. Select [Headphones volume], then press
OK.
Press +/- on the remote control.
Press +/- on the front of the TV.
Press to mute the TV, or
Press again to restore the volume.
> [Setup] > [TV settings] >