Table of Contents
Advertisement
Controlling Your TV with the Supplied Remote
The remote control can be compatible with various
brands of TV by setting their control codes. The
TOSHIBA code has initially been set to control
TOSHIBA TVs.
SETTING TV CONTROL CODES
1. While holding down PROG/MEMO. button, enter
the two digits of your TV's brand code (listed on
page 39) using number buttons.
2. Release PROG/MEMO.
By pressing
You can
POWER
Turn the TV on or off.
CH (4 4 /3 3 )
To select TV channels in the
upper or lower direction.
VOLUME (+/-)
Adjust the volume of the TV.
INPUT
Switch the TV's input source
between the TV and other input
sources.
Important
Some TVs may not respond to all the operations
above, or may not be operated at all with this
remote control. In this case, operate your TV with
its own remote control.
Notes
For some brands, several control codes (brand
codes) are allocated. Try each of them until the
buttons work on your TV.
If you replace the remote control's batteries, set the
brand code again.
38
TV Control Buttons
Advertisement
Table of Contents
