Programmed Playback; Repeat Programmed Tracks; Erasing A Track From Program List; Erasing The Complete Program List - Toshiba SD-C67HTSU Owner's Manual

Programmed Playback

The program function enables you to store your
favorite tracks from any disc in the DVD Home
Theater System memory. A program can contain 30
tracks.
1. Insert a disc.
Audio CD/Memory card or MP3/WMA Discs:
AUDIO CD/Memory card or MUSIC menu appears.
2. Press PROG.
The mark will appear to the right of the word
E
"Program" on the right side of the menu screen.
Note:
PROG
Press again, then the
the Program Edit mode.
AUDIO CD
0:52:07 1 / 12
List
Program E
Track1 Track5
Track2 Track7
Track3 Track4
Track4
Track1
Track5
Track6
Track7
Clear All
Track8
Edit
PROGRAM
Audio CD Menu
Video CD: Press PROG while playback is
stopped. The program menu appears. Press
PROG again and hold it down for a few seconds
to exit the menu.
Note:
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the programmed playback (See "PBC" on
page 24).
VIDEO CD
List
Track1
Track2
Track3
Track4
Track5
Video CD Menu
3. Select a track on the "List", then press ENTER to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing on the
"Program" list.
5. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
"Program" list have played once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD/Memory
card (or MUSIC) list and then press PLAY.
32
mark will disappear to exit
E
MUSIC
0:00:00 1 / 12
List
Program E
2-Music2
4-Music4
1-Music1
2-Music2 6-Music6
1-Music1
3-Music3
4-Music4
5-Music5
6-Music6
Clear All
7-Music7
DISPLAY Info PROGRAM Edit
MP3/WMA Menu
E
Program
Track5
Track2
Track3
Track1
Clear All

REPEAT PROGRAMMED TRACKS

1. Press REPEAT during program playback. The
repeat icon appears.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Note:
If you press > once during Repeat Track playback, the
repeat playback cancels.
ERASING A TRACK FROM "PROGRAM"
LIST
1. Use v V to select the track that you wish to erase
from the Program list.
2. Press CLEAR to erase the higlighted track.
ERASING THE COMPLETE PROGRAM
LIST
1. Press B to move to the "Program" list.
2. Use v / V to select "Clear All", then press ENTER.
Note:
The programs are also cleared when the disc is removed.