Still Picture And Frame-By-Frame Playback; Slow Motion; Repeat A-B; Repeat - Toshiba SD-44HKSE Owner's Manual

Operation with DVD and Video CD (Continued)
General Features (continued)

Still Picture and Frame-by-frame playback

DVD VCD2.0 VCD1.1
1 Press PAUSE/STEP during playback.
The DVD/CD Receiver will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by press-
ing PAUSE/STEP repeatedly on the remote control.
3 To return to normal play, press PLAY.

Slow Motion

DVD
1 Press SLOW - or + during playback.
The DVD/CD Receiver will enter SLOW mode.
2 Use the SLOW SCAN - or + to select the required
speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward),
or T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To return to normal play, press PLAY.
Note
Slow motion playback in reverse is not applicable for
Video CD.

Repeat A-B

DVD VCD2.0
A B
A * OFF
To repeat a sequence in a title or group:
1 Press REPEAT A-B at your chosen starting point.
" A * " appears briefly on the TV screen.
2 Press REPEAT A-B again at your chosen end point.
"A B" appears briefly on the TV screen, and the repeat
sequence begins ("RPT" appears on the display window).
3 To cancel the sequence, press REPEAT A-B.

Repeat

VCD2.0
DVD
CHAPT TITLE TRACK
DVD Video Discs - Repeat Chapter/Title/Off
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
VCD2.0 VCD1.1
VCD1.1
VCD1.1
ALL OFF
Video CDs - Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 18.

Time Search

DVD
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 10 seconds, press 3 3 /4 4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
0:16:57 - : - - : - -
21