Kenwood KAX643ME Instructions Manual page 3

124224 Iss 1 KAX643ME multilingual:Blender template multi Iss 5
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
This KAX643ME attachment
features the Twist Connection
System and is designed to fit
directly on the latest generation
Kenwood Chef models (identified as
KVC and KVL series).
This attachment can also fit Kmix
kitchen machines featuring a slow
speed attachment outlet (KMX
series).
To check that this attachment is
compatible with your kitchen
machine you will need to ensure
both components feature the Twist
Connection System
If your kitchen machine features the
Bar Connection System
also need an adaptor before
operation is possible. The reference
code for the adaptor is KAT001ME.
For more information and how to
order the adaptor visit
www.kenwoodworld. om/twist.
Use the roto food cutter to slice and
shred such foods as carrot,
cucumber, cabbage, apples, potato
and cheese.
before using for the first time
1 Wash the parts: see 'Cleaning'.
key
pusher
feed tube and body
drum retainer
drums
to assemble your
roto food cutter
assembly
1 Select a drum. The drums are
numbered at the back and used as
follows:
Drum No 1 - For fine shredding :-
G
chocolate, nuts, carrot and cheese.
Drum No 2 - For coarse
G
shredding :- chocolate, nuts, carrot
and cheese.
Drum No 3 - For thin slicing :-
G
onion, cabbage, cucumber, carrot,
apples, potato and chocolate.
Drum No 4 - For thick slicing :-
G
onion, cabbage, cucumber, carrot,
apples, potato, chocolate and
beetroot.
Drum No 5 (Rasping drum) -
G
For grating parmesan cheese and
.
potato for German potato
dumplings.
2 Fit the drum into the body of the
you will
roto food cutter.
3 Lock the drum retainer in position by
turning anti-clockwise until the
locating line is directly underneath
the line on the body
to use your
roto food cutter
1 Lift off the slow speed outlet cover
by pressing the top and lifting off
2 With the attachment in the position
shown, locate to the slow speed
outlet and rotate to lock in place
3 Place a collecting vessel beneath
the outlet.
4 Fill the feed tube to prevent food
from slipping sideways during
processing. Switch onto speed 3 - 4
and gently push down with the
pusher. Note: The pusher will only fit
one way.
When slicing cabbage, cut into
G
wedges and remove the stalk. Place
in the feed tube and keep upright
with steady pressure on the pusher.
3
.
.
.
16/