Connecting An Hdmi Coor Dv] De,Ice To The Hdmi Input - Toshiba 40G300U Owner's Manual

Integrated high definition lcd tv
Hide thumbs Also See for 40G300U:
Table of Contents

Advertisement

Connecting aft HDNI ® or DVI
device to the HDN] input
The HDM[ input on your TV receives digital audio
and uncompressed
digital video from an HDM[
source device, or macompressed digital video from a
DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content
Protection) wogram
material in digital form from ElA/CEA-861-D-
compliant m consumer electronic devices (such as
a set-top box or DVD player with HDM[ or DVI
output).
The HDM[ input can accept and display VGA,
SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p
(60Hz), 720p (60Hz), 1080i (60Hz) and 1080p
(24Hz/60Hz)
signal formats. For detailed signal
specifications,
see page 66.
Supported Audio format: Linear PCM, sampling rate
32/44.1/48
kHz
Note: To connect a PC to the HDMI input, see page 19.
To connect
an HDMI device,
you will need:
.
one HDM[ cable (type A connector) per HDM[ device
- For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo (
H_mr
).
_ To display an 1080i/60Hz signal format, you
will need a Category 2 cable. Conventional
HDMI/DVI cable may not work properly.
_ HDMI cable transfers both video and audio.
Separate analog audio cables are not
required (see illustration).
-
See "Setting the HDMI® audio mode"
(_,_page 33).
_g_,"]
w back panel
I
'°'i_'i _ Control panel
HDIVll d evice
_4
_
.....
.....
To view the HDM!
device
video:
Select the HDM[ 1, HDM[ 2, HDM[ 3 or HDM[ 4
video input source on the TV.*
,:, To select the video input source, press INPUT on
the remote control (t:+ page 22). To program the
TV remote control to operate other devices, see
Chapter 3.
16
To connect
a DVI device,
you will need:
.
one HDMI-to-DV[
adapter cable (HDM[ type A
connector) per DV[ device
-
Forproper operation, the length of an HDMI-
to-DVl adapter cable should not exceed 9.8 ft
(3m). The recommended length is 6.6 ft (2m).
.
one pair of standard analog audio cables per DVI[
device
- An HDMI-to-DVI adapter cable transfers
video only. Separate analog audio cables
are required (see illustration).
_ See "Setting the HDMi° audio mode"
(r:+page 33).
TV back panel
Note: Toensure that the HDM/ or DVI device is reset
properly, it is recommended that you follow these
procedures:
°
When turning on your electronic components,
turn en the TV first, and then the HDMI or
DVI device.
°
When turning offyour
electronic components,
turn off the HDMI or DVI device
first, and
then the TV
[1] EIA/CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-definition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
40 46550300U
ENASindb
16
2010/,4/16
F@05:48:21

Advertisement

Table of Contents
loading

This manual is also suitable for:

40g30u46g300u46g30u55g300u

Table of Contents