Connecting A Vcr And Antenna, Cable Tv Or Camcomer - Toshiba 40G300U Owner's Manual

Connectinga VCRand antenna, Cable TV or Camcorder
TVbackpanel
1
From CaMe TV or FromCableTV
antenna ! C_
VIDEO2 inputs
on TV right side panel
You will need:
., coaxial cables
., standardA/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only
• standard audio cables(If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TX
To view the antenna or Cable signal:
Select the ANT/CABLE video input source on the TV.*
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLE video
input source oll the TV.* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO1 video input
source on the TV.*
To view the camcorder video:
Select the VIDEO 2 video inputsource on the TV.*
:_- To select the video input source, press INPUT on
the remote control (t:__page 22). To program the
TV remote control to operate other devices, see
Chapter 3.
Theunauthorized r ecording, use, distribution,or
revisionof televisionprograms, v ideotapes,DVDs,
andother materialsis prohibitedunder theCopyright
Laws of the UnitedStatesandother countries,andmay
subjectyou to civil andcriminal liability.
14
40 46550300U F_NASindb 14 2010/,4/16 F@05:48:19