Table of Contents
Advertisement
Overview
Topology
8 / 56
Siemens
Building Technologies
2.2
What does this document describe?
The document describes proper mounting and wiring for
– the room automation station.
– the TX-I/O modules in an installation box or panel.
– for peripheral devices connected to the TX-I/O modules.
– for peripheral devices connected via PL-Link, DALI and EnOcean.
The areas indicated above can be briefly described as follows:
Range
Installation boxes.
Building services
equipment
Mounting and installation
Introdution
PL-Link devices
Brief description
The following devices are installed in the installation box:
– PXC3... room automation station.
– TX-I/O modules connected to the room automation
station via the island bus.
Connected plants and systems, including: Heating,
ventilation and air conditioning plants, electrical systems,
etc., as well as electrical areas (switches, buttons, lighting
groups, blinds).
QMX3...
CM111043en_03
2013-02-23
Advertisement
Table of Contents
