Advertisement
DRIVE CONNECTORS – SD-R1102
Figure 1.SD-R1102 Combo Drive Rear Panel - Connectors
Power
Power is supplied to your DVD drive by the connection with your computer's +5V/+12V
power cable to the power socket at the back of drive. One side of the plug has chamfered
Connector
edges, so the power connector fits only one way
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON
Audio
Supplies Analog and Digital sound to your system.
Connectors
The SD-R1102 DVD drive is connected to your computer system through the ATAPI
ATAPI
connector
Connector
The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
Mode
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
Select
(Slave) or MA (Master). (see Setup for additional information).
Jumper
13
Advertisement
