Download Print this page

Siemens FHD2012-U1 Installation Instructions page 2

Inner door for remote terminal display module

Advertisement

2. Follow the installation instructions of the FT2014 or FT2001, P/N A6V10315046, giving
consideration on its wiring and electrical requirements.
Install the Inner Door:
1. Place three of the four #8-32 x 5/16" screws provided in the bottom three holes for the door on the
left side of the enclosure and tighten them a few turns.
2. Slide the inner door into position under the screws.
3. Close the door and make certain that the spring-loaded fastener fits in the hole on the right side of
the enclosure. Screw down the fastener to secure it in place.
4. Place one more #8-32 x 5/16" screw in the top hole and tighten all four screws securely.
P/N A6V10385202_a_en_--
Figure 2: FHD2012-U1 with RDT
Figure 3: FHD2012-U1 in FHD2001-U1 with FT2014
2

Advertisement

loading