Download Print this page

Installation And Wiring - Siemens 5WG1 201-2DBx3 Series Technical Product Information

Gamma arina touch sensor
Hide thumbs

Advertisement

Gamma instabus
Technical product information
June 2014
Gamma arina touch sensor
Location and function of the display and operat-
ing elements
E2
E3
E6
E2
E3
E6
E2
E3
E6
E2
E3
E7
E6
Figure 3: Display and operating elements
E1
Upper touch area indicator
E2
LED for status annunciation (not available with UP
20x/x2, invisible when turns off)
E3
LED for orientation lighting
E4
LED for programming lighting (invisible when turns
off)
E5
Lower touch area indicator
E6
Labelling field (length: 82 ± 0.15mm, width: 18.35
± 0.1mm, thickness: < 0.2 mm)
E7
IR receiver hole (UP 203/x5 only)
Technical product information
Update: http://www.siemens.com/gamma
2.16.1.13/6
single
double
quadruple

Installation and wiring

General description
The touch sensor is mounted onto the conduit box
E1
together with its mounting frame.
The mounting frame is not included and therefore has to
E4
be ordered separately (see current catalog).
Mounting
E5
− Mount the mounting frame (F1) onto conduit box (G1)
E1
− Wiring the KNX connector (H2).
− Insert the KNX connector (H2) to the touch sensor (see
E4
E5
− Slip the wall switch's main module (F3) together with
E1
E4
E5
E1
E4
E5
F1
F2
F3
F4
F5
E6
Subject to change without further notice
via mounting slots with mounting screws (F2) (see
figure 4),
figure 5). Please be noted the polarity of bus
connection with mark on housing.
(F4) onto the mounting frame and firmly press them
together (see figure 6).
F3
F4
Figure 1: Mounting sequence
Mounting frame
Mounting screws
Back housing
Front housing
Programming button
Labelling field
F1
F2
E6
F5
UP 20x, UP 28x/3 and UP 28x/5
Siemens Building Technologies

Advertisement

loading

  Related Manuals for Siemens 5WG1 201-2DBx3 Series