Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries - Toshiba 34HFX83 Owner's Manual

Using the remote control

Preparing the remote control for use

Your Toshiba TV remote control has one dedicated TV mode and five
universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The
target devices and default devices being programmed for each mode
are as follows:
Target device/Mode mapping
Mode
TV Toshiba TV
CABLE/SAT Universal Cable, Satellite
VCR Universal VCR, DVD, LD, Cassette
DVD Universal DVD, VCR, LD, Cassette
AUDIO1 Universal Audio: Amp., Tuner, Misc.Audio, CD/MD
AUDIO2 Universal Audio: CD/MD, Amp., Tuner, Misc.Audio
Default device codes
Mode
TV Toshiba TV
CABLE/SAT Toshiba Satellite receiver
VCR Toshiba VCR
DVD Toshiba DVD
AUDIO1 Pioneer Audio receiver
AUDIO2 Pioneer LD
Repeatedly press MODE to cycle among the modes. If you own
different brands of audio/video devices,you must first program your
remote control (see "Programming the remote control for use with
your audio/video devices" on page 17).

Installing the remote control batteries

To install the batteries:
1. Slide the battery cover off the back of the remote control.
2. Install two "AA" size alkaline batteries. Match the + and – signs
on the batteries to the signs on the battery compartment.
3. Slide the battery cover on to the remote control until the lock
snaps.
Device
Default device
Note:
Your TV's remote control may not operate
certain features on your VCR, cable TV
converter, or other electronic device.
Refer to the owner's manuals for your other
devices to determine their available features.
If your TV's remote control does not operate a
specific feature on a device,use the remote
control that came with the device.
POWER
TV
LIGHT SLEEP
CABLE/SAT
VCR
1 2 3
DVD
AUDIO1
AUDIO2 4 5 6
MODE
MODE
7 8 9
PIC SIZE
+10
0
100/
ENT
ACTION
MENU
FAV
ENTER
FAV
VOL
CH
EXIT
DVD CLEAR
DVD RTN
CH RTN INPUT RECALL MUTE
SLOW/DIR SKIP/SEARCH
Caution:
• Dispose of batteries in a designated
disposal area.Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.
• If the batteries are dead or if you will not
use the remote control for a long time,
remove the batteries to prevent battery acid
from leaking into the battery compartment.
15