Connecting A Dvd Player Or Satellite Receiver And A Vcr - Toshiba 32AF53 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs, and record from the satellite receiver or TV. You can record
one TV program while watching another TV program.
You will need:
• two (or three, if satellite receiver is used) coaxial cables
• one set of standard A/V cables
• one S-video cable
• one pair of standard audio cables
Stereo VCR
From Cable, Cable
Box, or Antenna
IN from ANT
CH 3
CH 4
TV
From Satellite Dish
(for Satellite
IN from ANT
Receiver only)
DVD Player/Satellite Receiver with S-video
VIDEO
OUT to TV
COLOR
S-VIDEO
STREAM
INPUT
Y
VIDEO
ANT( 75 )
L /
P
MONO L
AUDIO AUDIO
P
R R
VIDEO 1 VIDEO 2
IN DVD IN
AUDIO
OUT
L
R
S-VIDEO VIDEO
OUT OUT
Note:
• For the highest possible picture quality
from a DVD player/satellite receiver that
does not have component video
connections, use an S-video cable (plus the
standard audio cables) between the TV
and DVD player/satellite receiver. If your
DVD player (or satellite receiver) has
component video, see "Connecting a
DVD player with component video and a
VCR" on page 10.
• Do not connect both an S-video cable and
a standard video cable to VIDEO-1 on the
TV back (or VIDEO-3 on the TV front) at
the same time, or the picture performance
AUDIO
will be unacceptable.
L R
IN
• Do not connect the DVD player/satellite
receiver and VCR to the same A/V inputs
OUT
on the TV. (See the illustration at left, which
shows the DVD player/satellite receiver
connected to VIDEO-1 and the VCR
connected to VIDEO-2.)
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
VIDEO
the Copyright Laws of the United States and
L / other countries, and may subject you to civil
B
MONO
and criminal liability.
R AUDIO
VAR/FIX
R
OUT
9