Using The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box) - Toshiba 32AF53 Owner's Manual

Using the remote control to operate a cable converter box,
satellite receiver, VCR, DVD player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate,
you must first program the remote control to recognize the device (if you have not already done so). See pages
15–16.
To use your TV remote control to operate a:
• cable converter box or satellite receiver, set the Device Switch to "CBL/SAT."
• VCR, set the Device Switch to "VCR."
• DVD player or HTIB, set the Device Switch to "DVD."
Note:
• Even after the TV remote control is programmed, it
may not operate certain features on your other
device. If this happens and you wish to use those
features, you will need to use the device's original
remote control.
• This illustration describes typical external device
functions (not TV functions). The buttons on this
remote control may or may not work as described
for your specific device.
Accesses DVD chapters higher than 10,
or VCR channels higher than 100.
TOP MENU (SLEEP)
Accesses a DVD's top menu.
Accesses a DVD's menu system.
DVD ENTER function.
Set to TV to control the TV; CBL/SAT to control a
cable converter box or satellite receiver; VCR to control
a VCR; DVD to control a DVD player or HTIB.
To view one program while recording
another, press to select TV mode.
Rewinds the tape or DVD. (Press during playback
to view the picture moving rapidly backward.)
Fast-forwards the tape or DVD. (Press during playback
to view the picture moving rapidly forward.)
Point the remote control
directly at the device.
+10 / 100
DVD MENU
ENTER
Device Switch
TV/VCR
REW
REC
Starts recording.
FF
RECALL
DVD DISPLAY function.
POWER
Turns the selected device on and off.
}
Channel Numbers
Press to directly access channels
(as opposed to CH
ENT
Required by some VCRs and cable
}
converter boxes to change the channel.
T S
st
Navigate DVD menus.
CLEAR
DVD CLEAR function.
CH
st
selects the next higher channel;
s
selects the next lower channel.
t
PAUSE
Press during playback or recording to
pause the picture; press again to restart.
PLAY
Begins playback of a tape or DVD.
STOP
LIGHT
Stops the tape or DVD.
SKIP/SEARCH SS
Skips forward to beginning of next
DVD chapter.
CT-90158
SKIP/SEARCH
Skips back to beginning of current
DVD chapter or previous chapters.
).
st
|
|
TT
17