Using The Block Channel Feature - Toshiba 32AF44 Owner's Manual

Using the BLOCK CHANNEL feature (V-Chip control)
With the BLOCK CHANNEL feature, you can block specific
channels. You will not be able to tune blocked channels until you
clear the setting.
You can block a maximum of four channels.
If you try to tune a blocked channel, the nearest unblocked channel
will appear.
Note: The BLOCK CHANNEL feature is not affected by the
ENABLE BLOCKING setting (as described under "MPAA rating blocking"
on page 30).
To block a channel:
1. Tune the TV to the channel you want to block.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight V-CHIP CONTROL, and then
press •. The PIN code entering screen opens.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
[ ] [ ]
MOVE START
4. Press the Channel Numbers (0–9) to enter your 4-digit PIN code
(see page 29). The V-CHIP CONTROL menu opens.
5. Press y or z to highlight BLOCK CHANNEL, and
then press • to open the BLOCK CHANNEL menu.
6. Press x or • to highlight SET, and then press z. The blocked
channel number appears in the list.
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
[ ] [ ]
MOVE SELECT
7. Press EXIT.
8. Repeat steps 1–7 for other channels you want to block.
To unblock a channel:
Follow steps 1–8 above, but select CLEAR in step 6.
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
[ ]
MOVE [ ] SELECT
SET UP
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
SET UP
BLOCK CHANNEL
[SET ] CLEAR
6
0 0 0
SELECT [ ] [ ]
SET
END [EXIT]
SET UP
BLOCK CHANNEL
[CLEAR]
SET
0
0 0 0
SELECT [ ] [ ]
SET
END [EXIT]
Channel
Numbers
yzx •
MENU
33