Add/Erase Function - Toshiba 27A50 Owner's Manual

ADD/ERASE function

After performing the CH PROGRAM function, you can add or erase specific
channels.
1 Select the channel you want to erase using the CHANNEL L or M
button, or select the channel you want to add using the Channel
Number buttons.
2
Press MENU repeatedly until the Setup
menu is displayed on the screen.
3
Press s or t repeatedly until "ADD/
ERASE" is displayed in purple.
4
Press T or S :
To erase the channel
Press the button until "ERASE" is displayed
in purple indicating that the channel has
been erased from the memory.
To add the channel
Press the button until "ADD" is displayed in
purple indicating that the channel has been
memorized.
5
Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: ADD[ERASE]
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
CABLE channel reference chart
Correspond-
Number on Number on
ing CABLE
this TV this TV
channel
1 A-8 67
5 5(A-7) 68
6 6(A-6) 69
14 A
15 B 92
16 C 93
94
34 U 95
35 V 96
36 W 97
37 AA 98
38 BB 99
100
60 XX 101
61 YY 102
62 ZZ
63 AAA 123
64 BBB 124
65 65 125
66 66
The above chart is typical of many cable
system channel allocations. If in doubt,
consult your cable company.
Correspond-
ing CABLE
channel
67
68
69
92
93
94
A-5
A-4
A-3
A-2
A-1
100
101
102
123
124
125
17