Mounting On A Standard Wall Plate; Wall Mounting - Toshiba FT-8001 A Owner's Manual

After the battery pack is fully charged;
Operation
While in use (Talk mode)
While not in use (Standby mode)
When TALK/BATT LOW LED blinks, all handset buttons are disabled
and the battery needs to be charged. If this occurs during a call, you
hear short beeps. Finish the call as soon as possible and place the
handset on the base unit.
Note
If a call comes in when the battery is too low to operate properly, you will be unable to answer the
call or the call will be disconnected.

WALL MOUNTING

MOUNTING ON A STANDARD WALL PLATE

Insert the bracket's tab into the
base's lower tab slots, then press
down on the top of the bracket to
snap it into the clip slots.
Flip the switch hook tab
over so the tab holds the
handset.
Raise the antenna.
Telephone
Line Cord
7
Approx. battery life
up to 7 hours
up to 14 days
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)
AC Adaptor