Ds 30 - Scale Status; Table 5-7 Status Information - Siemens SIWAREX MS Device Manual

Weighing Functions
5.7.1 DS 30 – Scale Status
The status information provides details of the current state of the scale.
Bit No. Name
0 Limit value 1
1 Limit value 2
2 Scale tared
3 Preset tare
4 Max+9e
5 ¼d zero
6 Standstill
7 Module adjusted
8 Parameter definition
blocked
9 Min. weighing range
undershot
10 --
11 --
12 --
13 --
14 Booting
15 Module group fault
Table 5-7 Status information
5-32 SIWAREX MS
Range of Values / Meaning
1 = Limit value 1 has responded
1 = Limit value 2 has responded
1 = Tare memory occupied (≠ 0)
1 = Tare memory contains ext. default value
1 = Gross weighing range exceeded or undershot by more than 9 display steps
1 = Gross less than ± 0.25d (d corresponds to set numeral step)
1 = Standstill exists
1 = Module adjusted
1 = Write protect switch active;
(No adjustment parameter DS3 or adjustment commands can be sent)
1 = Min. weighing range undershot
--
--
--
--
The SIWAREX module is starting up
1 = Global module fault / operating error (SF)