INTRODUCTION - MK8025GAS (HDD2188) General Features • 2.5" sized drive • 80 Gigabytes • 9.5mm High • Fluid Dynamic Bearing (FDB) Motor • 12ms Average Seek Time • ATA-2,3,4,5,6 Interface • Supports high transfer rates of 100 MB/sec • 8MB Buffer •...
Master/Slave Settings Your Toshiba Hard Disk Drive can be configured as either a "Master" or "Slave" unit. Master configuration is used for all single drive applications, and master or slave configuration (only one of each per port) is used for two drive applications.
Page 5
Installation Notes The drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. In order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB. Space should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.
My system is not able to recognize all available capacity on my Hard Disk Drive. What do I need to do to utilize the complete hard drive? How do I install my 2.5" Toshiba Hard Drive into my desktop or tower system? Solution There are some systems that are unable to recognize the new larger Hard Drives on the market.
SPECIFICATIONS –MK8025GAS (HDD2188) General Model Interface Functionality Formatted Capacity Rotational Speed Avg. Rotational Latency Spin-up Time Buffer Seek Time (Average) Internal Transfer Rate Host Transfer Rate Internal Drive Characteristics Number of Disks Number of Read/Write Heads Track Density (TPI) User Data Cylinders Logical Cylinders Logical Heads Logical Sectors/track...
Page 9
Physical Height Width Depth Weight Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) Canadian Standard Association (CSA) C22.2 No.220 No. 950 TUV Rheinland EMC - EN50081-1 EMC - EN50082-1 0.37" (9.5mm) 2.75" (69.85mm) 3.94" (100mm) 3.46oz (99g) typ 1950 EN 60 950 EN55022: 1988 Class B...