Table of Contents
Advertisement
Digital Features
Tone/Pulse Dialing
Tone/Pulse Dialing
With some older COs, calls are made on CO lines that are programmed for rotary
dial pulses. This feature enables you, while on these lines, to switch to tone dial in
order to access remote equipment (such as an answering machine) requiring DTMF
tones.
With ISDN calls, when you press
entered after that point are sent with DTMF tones.
To change Tone Dialing
1. Access a CO line.
2. Dial a telephone
number.
3. While on the call,
press
6HOHFW#+)&1
[B]).
Two CO Line Connection (Tandem)
To connect two outside lines (using a [DN] button)
1. While talking on an
outside call using a
[DN] button, press
)&1
2. Dial a CO line access
code and then the
outside telephone
number.
66
Although the CO line is programmed for rotary dial
pulses, access the CO line and dial the telephone
number like any other call described in this user
guide.
You can send DTMF tones with your dial pad. The
7RQH#'LDO#
feature is cancelled when the call is completed.
+
You hear dial tone and the call is put on hold.
5
+
.
If you receive a busy tone or no answer, press [DN]
to return to the original connection.
See
or ask your System Administrator.
7RQH#'LDO#6HOHFW
Table 9
on
Page
109—CO Line Access Codes
Strata AirLink Integrated Wireless Handset 5/99
)&1
(
+ [B]), all of the digits
Advertisement
Table of Contents
