TEC FS-1450 Owner's Manual page 83

5. READ (X) AND RESET (Z) REPORTS
The following table shows the key operation to take each report. The "X" and "Z" reports have exactly the
same print content if both are available, except that:
1. The "X" reports allow to read the sales data but not clear memories, while the "Z" reports allow to
read the sales data and at the same time all the resettable memories will be cleared when the
reports have been issue.
2. The symbol "X..." is printed on the top line of a Daily Read Report, "Z..." on a Daily Reset Report,
"GTX..." on a GT Read Report, and "GTZ..." on a GT Reset Report, as initial settings.
3. A reset count is printed on the bottom of a "Z" report only.
When opening the cash drawer, be careful not to let the drawer hit any person.
Daily Reports
REPORT NAME
FINANCIAL READ AND RESET
• Financial Read
• Financial Reset
CASHIER READ AND RESET
• All Cashier Read
• All Cashier Reset
• Individual Cashier Read
• Individual Cashier Reset
SALESPERSON READ AND RESET
• All Salesperson Read
• All Salesperson Reset
CREDIT CARD COMPANY SALES READ
AND RESET
• Credit Card Company Sales Read
• Credit Card Company Sales Reset
DEPARTMENT GROUP READ
MEDIA SALES AND IN-DRAWER TOTAL READ
WARNING!
TABLE OF OPERATIONS FOR X AND Z REPORTS
MODE
KEY OPERATION
LOCK
X
3 [AT/TL] (Drawer opens.)
Z
X
4 [ST] (Drawer opens.)
Z
X Code Entry Method:
Z 4 [#] |Cashier ID Code| [AT/TL]
(2-digit manager-assign code)
Cashier Key Method:
Set the required Cashier Key
(or depress the required Cashier
Key), then 4 [#] [AT/TL]
X
5 [AT/TL]
Z
X
6 [AT/TL]
Z
X 8 [AT/TL]
X 9 [AT/TL] (Drawer opens.)
- 9 -
EO1-11097
SAMPLE
PAGE
14
16
17
17
18
19