(4.3) Changing Detail (Outline) Gain; (4.4) Changing Master Pedestal; (4.5) Changing Dnr(Digital Noise Reduction) - Toshiba IK-HD1D Instruction Manual

4 3 Changing detail (outline) gain
Move the " " to DTL GAIN by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the detail gain by pushing [DATA UP], [DATA DOWN] buttons.
The detail decreases.
4 4 Changing master pedestal
Move the " " to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
M PED decreases
4 5 Changing DNR (Digital Noise Reduction)
Move the " " to DNR by pushing [MENU UP], [MENU DOWN] buttons.
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
Note:
When DNR is set to ON, noise is reduced, an accidental image might be outstanding while shooting
moving objects.
DATA UP
7 0
DATA DOWN
DATA UP
100 0
DATA DOWN
The detail increases.
7
M PED rises
100
26