Download  Print this page

Switching Off In Case Of A Fault - Electrolux 267752 Installation, Operation And Maintenance Manual

Gas steam/convection ovens
Hide thumbs

Advertisement

Opzioni
  FSC
  Show F value during cooking
Ask for FSC risk set on start
Cooking info in drawer
Hold
Default convection temp. 70°
Default steam temp. 70°
Probe temp. increase: Δ5°
Default cycle
AUTOMATIC
Enable Automatic
  Enable preset management
Preset Management
  Enable saving
  Enable changes
  Enable overwrite factory
  Enable delete
  Enable delete factory
  Enable upload from USB
  Enable download to USB
  Enable MultiTimer
Special cycles
Low Temperature Cooking
Proving
Regeneration
PROGRAMS
Enable Programs
Enable advanced functions
Enable save Programs
Enable edit Programs
MULTITIMER
  Enable MultiTimer
  Enable advanced MultiTimer
  Enable Programs
  En. temperature recovery
Programs
  Enable save Programs
  Enable edit Programs
  Enable delete Programs
  Load presets
MultiTimer Presets
  Enable save Presets
  Enable edit Presets
  Enable delete Presets
CLEANING
Enable Cleaning
Force after 0:00 of cooking
Default cycle
Soft
Medium
Strong
Extra strong
PASSWORD
Set password
AUTOSTART
  Enable Autostart
LOAD / SAVE CONFIGURATION
SAVE Oven Confi guration on USB:
1) Insert the USB key.
2) Access the Settings menu
3) Open the drawer and select the symbol
(download on USB)
Wait for completion of the download process.
4) Press OK and remove the key.
>
37
LOAD Oven Confi guration from USB:
1) Insert the USB key.
2) Access the Settings menu
3) Open the drawer and select the symbol
(upload from USB)
4) Select the required fi le (e.g. UI40_01.zip)
Wait for completion of the loading process.
Attention: Recipes / programs with the same name will be
overwritten.
5) Press OK and remove the key.
4.8.1 MAINTENANCE
BOILER DRAIN
Manual draining of steam generator water: press
the button to drain water from the steam generator.
6.1 STEAM GENERATOR PERIODICAL
(See
MAINTENANCE
)
Attention! In order to prevent excessive scaling
in the steam generator, make sure to:
 respect the parameters regarding the water
supply – see installation;
 always drain the generator at the end of each
day.
GUIDED DESCALING
Guided descaling of the steam generator (boiler),
with pure VINEGAR, facilitates the user in carrying
out descaling operations.
For its use, refer to par. 6.1 STEAM GENERATOR PERIODICAL
MAINTENANCE.
TECHNICAL ASSISTANCE
Technical assistance
By pressing this button a password is requested for
accessing the area reserved for authorised technical
personnel in order to edit the various oven operation
parameters.

5. SWITCHING OFF IN CASE OF A FAULT

In case of a fault, deactivate the appliance:
• Turn off the automatic power switch located ahead of the ap-
pliance and close the water and gas cocks.
• Contact an After-Sales Service Centre with qualifi ed personnel
authorised by the manufacturer.
IMPORTANT!
With cooking cycle in progress, the signalling of an error
code occurs with continuous sounding of the buzzer and
stopping of the cycle.
In this case the appliance can be used in ways not involving
the conditions that generated the error. Therefore just pro-
gram the oven for a cycle that does not use the damaged
component.
The After-Sales Service must be informed of the alarm code
appearing on the display.
USA

Advertisement

loading

  Related Manuals for Electrolux 267752