Fan speed *
Injection of water in compartment x (from 10sec. to 120sec.) -
FSC (Food Safe Control) x
The default speed is the maximum and never appears in
the information ﬁ eld, whereas the others will appear if selected
(half or pulsed).
compartment temperature (175°C)
core probe temperature
clock (1 hour : 58 minutes)
When the oven is switched on after several hours of inactivity, wait
20 seconds (the time necessary for stabilisation of the LAMBDA
probe) for a correct HUMIDITY reading.
Food can be cooked with different modes during its cycle and
therefore in different phases.
The oven enables programs consisting of several sequential pha-
ses (up to a max. of 15 phases). During cooking, going from one
phase to the next occurs automatically, until automatic stopping
of the program with completion of the last set phase.
A cycle with several phases is set by carrying out the following
1) switch the oven on;
2) Set for PHASE 1:
- cooking mode (humidity if necessary);
- compartment temperature;
- cooking time (or alternatively the core probe temperature).
3) Press the "Phase" button and then the "Add new phase" button.
4) For PHASE 2 and following, set as per PHASE 1.
When there are several phases, these will be listed, giving the
relevant settings (an arrow will scroll the next ones which are
1 of 12
1 of 1
Add New Phase
(see page 47)
Skip phase basket
Utilities (in drawer)
Scroll list arrow
Add phase button
The ﬁ gure shows phase 1 with the following settings:
cooking phase time (0 hours : 30 minutes)
Also, one or more phases can be skipped during cooking; press
next to phase 3 (ex. in ﬁ gure) to go to this.
The Multiphase also has special phases, such as:
for setting a pause between cooking cycles.
- Maintaining cycle
with the possibility of setting a food tem-
perature that is kept constant for an inﬁ nite time 8
With the MultiTimer system it is possible to set a different time for
each recipe (chicken, potatoes, etc.) or for each pan placed on
the various levels, e.g. starting from level 1 at the top and going
down to 2, 3, etc.
This function also allows the oven to be used with an "à la carte"
menu, where the food can be placed in the oven at the required time.
To set the MultiTimer, proceed as follows:
1) open the drawer in Manual mode and press the relevant button
Then press the following buttons:
to access the setting of times.
and enter the recipe name (chicken, potatoes,
and enter the time with the keypad.
To delete a name that is already set, assign a time 0.
For Name2 and following, set as per Name1.
To start the cooking cycle, open the oven door, load the food and
close the door.
The MultiTimer will start the countdown with the position having
the shortest time setting.
At the end of each set cooking time the oven will sound a beep
to indicate the type of food cooked. Open the door and remove
the ready to serve product.