3. DESCRIPTION OF CONTROL PANEL
The control panel has the following controls:
ON/OFF oven switch.
with direct selection of functions
by simply touching the
required symbol (icon), to activate-
the corresponding oven-
Data input and output
3.2 MAIN FUNCTIONS AND SYMBOLS
Hot air cycle: for roasting and gratinating with max.
temperature 572°F (300°C).
Combi cycle: superheated steam. The steam gene-
rator and compartment heaters are used at the same
time to keep foods tender (max. temperature 482°F)
Steam cycle: ideal for boiling (operating temperatu-
re automatically ﬁ xed at 212°F) (100°C ).
Low temperature steam can be set for gentle
cooking, vacuum packed foods and for defrosting
(temperature from 277°F a 210°F) (25°C a 99°); su-
perheated steam (temperature from 214° to 266°F)
(101° to 130°C).
Electronic humidity adjustment: for
adjusting the required humidity level in
the Combi Cycle.
Hot air cycle with compartment vent open:
for very dry cooking, allowing the removal of
humidity when necessary (max. temperature
Hot air cycle with adjustable compartment
vent: for cooking with humidity adjustable from
1 to 99 %, allowing the removal of humidity
when the set value is exceeded.
Hot air cycle with compartment vent closed:
for cooking with high humidity. (Default setting)
Cooking with ECO-DELTA: for cooking large pieces
of food (at least 5kg, e.g. whole turkey, leg of pork, etc.).
In this cooking mode a temperature setting of between
68° and 248°F (20° and 120°C) is selected.
In this case, cooking is moderate and long, since
the COMPARTMENT temperature is automatically
adjusted according to the temperature inside the food
(CORE PROBE), maintaining a constant difference
(ECO-DELTA) between them, from start to end of
The ECO-DELTA function is only possible with the
core probe inserted.
= 180°...180...180... 180... 180°F
= 50°... 51... 52... 100... 140°F
COMPARTMENT = 230°... 231...232...260... 320°F
Humidity setting and adjustment:
for activating or excluding the humidity
or adjusting the required level in the
Hot Air Cycle.
Digital thermostat for
control of compartment
Timer for control of
The letter S next to the
number means short co-
oking cycle; see symbol
thermostat for control
of product core tempe-