Danfoss VLT AutomationDrive FC 360 Installation Instructions
Fan replacement
Hide thumbs
Also See for VLT AutomationDrive FC 360:
- Programming manual (164 pages) ,
- Design manual (88 pages) ,
- Quick manual (78 pages)
Advertisement
Quick Links
Installation Instructions
VLT® AutomationDrive FC 360 Fan Replacement
1.1.1 Scope of Delivery
Enclosure
Power range [kW]
J1
0.37-1.5
J1
2.2
J2
3.0-5.5
J3
7.5
J4
11-15
J5
18.5-22
Table 1.1 Ordering Numbers
1.1.2 Safety Instructions
Minimum waiting time [minutes]
Voltage [V]
4
380-480
0.37-7.5 kW
Table 1.2 Discharge Time
Ordering number
132B0275
132B0276
132B0277
132B0278
132B0279
132B0280
15
11-22 kW
®
MI06F102 - VLT
is a registered Danfoss trademark
1.1.3 Demounting
Enclosure types J1, J2 and J4
1.
Grab the centre handle on the fan and use a flat-
edged screw driver to release the retaining level.
Illustration 1.1 Removing Fan on Enclosure Types J1. J2 and J4
1
Advertisement
Related Manuals for Danfoss VLT AutomationDrive FC 360
Summary of Contents for Danfoss VLT AutomationDrive FC 360
- Page 1 Table 1.1 Ordering Numbers 1.1.2 Safety Instructions Minimum waiting time [minutes] Voltage [V] 380-480 0.37-7.5 kW 11-22 kW Table 1.2 Discharge Time Illustration 1.1 Removing Fan on Enclosure Types J1. J2 and J4 ® MI06F102 - VLT is a registered Danfoss trademark...
- Page 2 Illustration 1.4 Pulling out Fan on Enclosure Type J3 Unplug the fan cable Illustration 1.3 Removing Fan Screw on Enclosure Type J3 Illustration 1.5 Fan Cable Plug. Plug Location Depends on Fan Type ® MI06F102 - VLT is a registered Danfoss trademark...
- Page 3 Illustration 1.6 Removing Fan Screws on Enclosure Type J5 Grab the centre handle an pull the fan outwards. Unplug the fan cable Illustration 1.7 Fan Cable Plug. Plug Location Depends on Fan Type ® MI06F102 - VLT is a registered Danfoss trademark...
- Page 4 132R0210 MI06F102 Rev. 2013-03-21 *MI06F102*...