USB 1/2,
• Connecting a large USB device may
interfere with other connected devices
beside it.
• When connecting a large USB device,
connect to the USB 1 port.
AUDIO OUT
• Supports 3-pole stereo mini jack only.
• To listen to the Monitor's sound through
the connected equipment, press HOME.
Select [Settings] t [Sound] t
[Headphone/Audio out] and then select
the desired item.
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
•
< 12 mm
< 21 mm
• HDMI IN 2/3
To enjoy high quality 4K 50p/60p
contents, connect a Premium High Speed
HDMI cable to the HDMI IN 2/3 and set the
[HDMI signal format] to [Enhanced
format].
For details of supported formats, refer to
the "Specifications" in Reference Guide
(page 18 - 19).
• HDMI IN 3 ARC (Audio Return Channel)
Connect your audio system to the HDMI IN
3 to route Monitor audio to your audio
system. An audio system that supports
HDMI ARC can send video to the Monitor,
and receive audio from the Monitor via the
same HDMI cable. If your audio system
does not support HDMI ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
4
GB
USB 3
/
REMOTE RS-232C
• Terminal for serial communication. For
details, refer to "RS-232C" on the control
functions (page 9).
RX
TX
GND
HDMI 1 AUDIO IN
• If the device has a DVI jack, connect it to
HDMI IN 1 through a DVI - HDMI adapter
interface (not supplied), and connect the
device's audio out jack to HDMI 1 AUDIO
IN.
* When connecting mono equipment, connect to the
L (MONO) audio jack (socket).